This is a demo store. No orders will be fulfilled.
2 Way - Close Coupled Jet Hose Assembly
£3.75
Plus 20% VAT
In stock
- Helps prevent jet hose catching on door handles, bushes, etc.
- Allows for a 'loop free' jet hose assembly
- Jet Hose length will need trimming to fit brush
Brush Compatibility:
- 23-26cm brushes with jet capsules
- 35-45cm brushes fitted with just 1 pair of jet capsules in inner jet position
If using with a new 'water-through' angle adapter you will need to lengthen the gooseneck hose on the gooseneck - standard size will need 150mm length and long length will need 220mm
(Brush not included)
Fitting Instructions
1. Take the black stem elbows and push fit into Jet Capsules
2. Place T connector centrally either just above or below brush socket with the jet hose connected
3. Measure the needed length of the jet hose to fully connect into each stem elbow - cut off excess hose (typically 5cm for a Super-Lite or Ultimate brush)
4. Push-fit jet hose into each stem elbow
Product Questions
Related Products
