This is a demo store. No orders will be fulfilled.
1 Box (10 units) Supreme 23cm Brush - Stiff
From £194.70 £330.00
Plus 20% VAT
In stock
Distributor Only - These do not include any Brush Socket, Screws, Jet Capsules or T Connectors - just the brush itself
MOQ: 1 Box (10 units) - not subject to any other Minimum Order Values
Lead time: Standard Lead Times
Shipping: These ship direct from our UK stock along with any other order components.
You will also need to order the following parts to complete these brushes:
- New Semi-Translucent Bristles - greater longevity
- Longer length, easy-splay bristle design - 190g
- Dual Trim - 'Stiff' feel
- Bristles - Inner Stiff / Outer Stiff - best for hot water
- If using fanjets, some bristles may need trimming to allow full spray width
- Click here for our Brush Guide pages
Supreme™ – Extra wide splaying bristles – feels very soft and easy on the glass whilst also providing some sill cleaning ability. Minimum pressure needed to achieve an easy splay of bristles with low frame impact due to compact & rounded edge stock design.
- Dual Trim - inner bristles are a shorter length - allows for easy splay
- Stiff Bristles - Suitable for hot water cleaning
- Stock Dimensions - 232mm x 37mm, Bristle Dimensions - 29cm (11.5") x 12cm (5")
- Large Bristle Splay Area - 348cm² - increases to 448cm² under full working pressure
- Suitable for rinsing on the glass
- Weight = 190g (bare brush stock)
- Features the Gardiner Jet Capsule System
- Suitable for use with water temperatures up to 75°C
- If using fanjets, some bristles may need trimming to allow full spray width
- If using this brush on a pole with a Swivel Gooseneck - you will need to pull out a little more of the gooseneck hose from the gooseneck and put an O-Clip around it so that it doesn’t pull back through the gooseneck and impede the swivel action, this will also prevent damage to the Jet Capsule
- If using this brush on a pole equipped with a pull on/off internal flow valve, such as a Univalve - you will need to have a hose clip or similar fitted above the gooseneck to prevent the gooseneck hose being pulled back into the pole which would tug on the jets and could lead to damage of the jets with long term use. Such damage would not be covered under warranty
- Six month manufacturing defect warranty

